


- Stock: 13
- Brand: iParts4u
- Compatible with: iPd 10/11
- SKU: 9509902010113
Replace the LCD panel on an Apple iPad 10 (2022) or iPad 11 (2025) with this aftermarket FOG LCD screen, for the Wi-Fi version. FOG stands for flex on glass, describing how the panel is built — the flex is bonded directly to the glass substrate. This is the display panel only: it does not include the touch digitiser.
Both generations share the same panel, so one part covers either repair. This is the right part where the display itself has failed — black screen, lines, dead pixels or backlight failure — while the customer's touch digitiser is intact and can be re-laminated onto the new panel.
Common Faults Resolved
- Display showing black, distorted, or lined image
- Dead pixels or blotches on the panel
- Backlight failure or uneven brightness
- Display damage with the touch digitiser intact
- Panel failure after a drop or liquid exposure
Key Features
- Part Type: LCD Panel Only — Aftermarket FOG
- Construction: Flex on glass — flex bonded directly to the glass substrate
- Includes: LCD display panel only
- Does not include: Touch digitiser or front glass
- Variant: Wi-Fi version
- Coverage: Fits both the iPad 10 (2022) and iPad 11 (2025)
- Condition: Brand new
- Warranty: 30 days — UK trade dispatch from iParts4U
Compatible With
- Apple iPad 10 (2022) — Wi-Fi version
- Apple iPad 11 (2025) — Wi-Fi version
Not Compatible With
- Cellular versions of the iPad 10 and iPad 11 — these use a different panel; order the cellular version instead
- Apple iPad 9 (2021) and earlier — different, non-laminated displays
- Apple iPad Air and iPad Pro models — different panels
What's Included
- 1 x Aftermarket FOG LCD panel for iPad 10 (2022) / iPad 11 (2025), Wi-Fi version
Important Notes
- LCD panel only — no digitiser. This part does not include the touch digitiser or front glass. The existing digitiser must be separated and re-laminated onto this panel, which requires separation, cleaning, OCA and laminating equipment. If you need a ready-to-fit display, order the complete assembly instead.
- Wi-Fi version only. The Wi-Fi and cellular models use different panels — check whether the device has a SIM tray before ordering.
- Aftermarket grade: this is a quality aftermarket FOG panel, not a genuine Apple part.
- Laminating equipment required: OCA, a laminating machine, a bubble remover and a dust-free working area. This is a bench job for an equipped workshop, not a straight swap.
- Handle the panel by its edges and keep both surfaces completely dust-free — any debris trapped under the OCA is visible in use and means starting again.
- Disconnect the battery before fitment to prevent short circuits.
- Bench-test the panel before laminating — verify image and backlight while it is still separate, as a fault found after bonding wastes the digitiser as well.
- Installation should be carried out by a qualified technician using ESD-safe tools.
This is an aftermarket component, not a genuine Apple part. Intended for use by qualified repair professionals and trade technicians only.
| Specifications | |
| Source | Aftermarket |
| Product Type | |
| Product Type | Screen |
| Warranty | |
| Warranty Length | 12 Months |
