Restore the 10.4-inch LCD touch screen on a Samsung Galaxy Tab A7 (SM-T500 WiFi or SM-T505 LTE) in white with this refurbished replacement LCD screen assembly, cross-referenced to Samsung service part GH81-19689A. This refurbished unit is built on a genuine Samsung LCD panel that has been renewed with aftermarket front glass and front cover — a cost-effective alternative to brand new service pack at a fraction of the price, suitable for trade professionals fitting LCD assemblies to white/silver Tab A7 devices.

The Tab A7 features a 10.4-inch 2000 x 1200 WUXGA TFT LCD with a 60Hz refresh rate, designed as a mid-range tablet for entertainment, browsing, and family use. This refurbished assembly preserves all the original Samsung panel's colour accuracy and touch sensitivity — only the outer protective glass and front cover have been replaced with high-quality aftermarket components to address front-screen damage. Internal LCD, digitizer, and flex cable are genuine Samsung components.

Common Faults Resolved

• Cracked or shattered front glass with intact display behind
• LCD displaying black, white, or distorted image
• Lines, bars or dead pixels across the screen
• Touch screen not responding or responding intermittently
• Backlight bleeding or uneven illumination
• Display showing colour shifts, banding, or incorrect colours
• Damaged digitizer affecting multi-touch functionality
• Front cover bezel damaged from drop impact
• Failed prior repair using a poor-quality aftermarket assembly

Key Features

• Genuine Samsung LCD panel renewed with quality aftermarket glass and front cover
• Samsung part number GH81-19689A — white/silver variant
• 10.4 inch TFT LCD matches the factory specification
• 2000 x 1200 WUXGA resolution for sharp visuals
• 60Hz refresh rate preserved when paired with original Samsung software
• Full digitizer integration for multi-touch and gesture input
• Front cover included — bezel and frame supplied with the assembly
• White colour variant — matches White and Silver Tab A7 devices
• Cost-effective versus brand new Samsung service pack pricing
• UK trade dispatch with fast delivery to UK repair shops
• 12-month warranty on this refurbished assembly

Compatible With

• Samsung Galaxy Tab A7 10.4" — SM-T500 (WiFi, International)
• Samsung Galaxy Tab A7 10.4" — SM-T500N (WiFi, Korea)
• Samsung Galaxy Tab A7 10.4" — SM-T505 (4G LTE, International)
• Samsung Galaxy Tab A7 10.4" — SM-T505N (4G LTE, Korea)
• Samsung Galaxy Tab A7 10.4" — SM-T507 (LTE regional variant)

Not Compatible With

• Samsung Galaxy Tab A7 10.4" Black variant — that's GH81-19690A, a different part number
• Samsung Galaxy Tab A7 Lite 8.7" (SM-T220, SM-T225) — smaller display, different assembly
• Samsung Galaxy Tab A 10.1" (SM-T510, SM-T515) — predecessor model, different chassis and panel
• Samsung Galaxy Tab A8 10.5" (SM-X200, SM-X205) — successor model with different mounting
• Samsung Galaxy Tab S7 11" (SM-T870, SM-T875) — higher-tier model, different panel

What's Included

• 1 x Refurbished Samsung Galaxy Tab A7 10.4" LCD screen assembly with renewed aftermarket front glass and front cover in white (cross-referenced to GH81-19689A)

Important Notes

• Refurbished grade disclaimer: this is a refurbished assembly, not a brand new Samsung service pack. The LCD panel and digitizer are genuine Samsung components renewed with high-quality aftermarket front glass and front cover. This grade is intended for trade repair only and offers better value than service pack while maintaining genuine panel performance.
• Trade-only product: due to the specialist nature of LCD assembly refurbishment, this product is intended for qualified repair technicians, not end consumers attempting DIY repair.
• White / Silver colour matching: this assembly is for white and silver Tab A7 devices. For black devices, order GH81-19690A instead. Colour mismatch will be visually obvious and will not match the rear cover.
• No display calibration required: Samsung tablets do not require software calibration after LCD replacement. After fitment, the display will operate at full specification.
• Disconnect the battery before fitment to prevent short circuits across the display flex connectors. The Tab A7 has a large 7,040mAh internal battery that should be disconnected at the mainboard before any display work.
• Heat application required: the Tab A7's display is bonded to the chassis with adhesive. Use a heat plate or controlled heat gun (60-80°C) and suction tools to lift the existing display safely without damaging the mainboard, battery, or surrounding components.
• Replacement adhesive required: after fitting the new assembly, fresh display adhesive (waterproof B7000 or precision-cut tablet adhesive) must be applied to secure the assembly.
• Bench-test before final bonding: connect the new assembly to the Tab A7 mainboard and verify display output and touch response across the full screen area before bonding it permanently to the chassis.
• Cleanliness is critical: dust or debris trapped between the LCD and chassis will appear as visible spots when the screen is illuminated. Work in a dry, dust-free environment.
• No S Pen support: the Tab A7 does not support S Pen input — this is an intentional product positioning by Samsung to differentiate from the Tab S range. LCD replacement does not change this.
• Installation should be carried out by a qualified technician using suitable heat, suction, separation, and ESD-safe tools.

For our complete range of compatible components, visit our Samsung Galaxy Tab A7 10.4 replacement parts category.

This is a refurbished LCD screen assembly — a genuine Samsung LCD panel renewed with aftermarket front glass and front cover. Not a brand new Samsung service pack. Intended for use by qualified repair professionals and trade technicians only.