Replace the battery on a Google Pixel 7 Pro with this genuine Google replacement cell, part number G949-00304-01. This is an original Google component rated at 5000 mAh, restoring full battery capacity and reliable runtime to a Google Pixel 7 Pro suffering from battery degradation. A failing battery shows as rapid drain, unexpected shutdowns, swelling, or failure to hold charge.

After a couple of years of charge cycles, battery health degrades and runtime drops noticeably. This genuine replacement restores the device to its original capacity and safe charging behaviour, a cost-effective repair that extends the usable life of the device.

Common Faults Resolved

• Rapid battery drain or short runtime
• Device shutting down unexpectedly with charge remaining
• Battery not holding charge or charging slowly
• Swollen battery cell (safety hazard — replace immediately)
• Device not powering on due to a failed cell
• Failed prior repair using a poor-quality aftermarket cell

Key Features

• Genuine Google component — original specification cell, not an aftermarket copy
• Google part number G949-00304-01 — verified original specification
• 5000 mAh rated capacity matches the factory specification
• Restores full runtime and safe charging behaviour
• Brand new condition — unused genuine cell
• UK trade dispatch with fast delivery to UK repair shops
• 30-day warranty

Compatible With

• Google Pixel 7 Pro — GE2AE / GP4BC / GFE4J (all variants)

Not Compatible With

• Google Pixel 7 (GVU6C) — standard model, different battery
• Google Pixel 7a — different battery
• Google Pixel 6 Pro — previous model, different cell

What's Included

• 1 x Genuine Google Pixel 7 Pro replacement battery, 5000 mAh (Google G949-00304-01)

Important Notes

• Genuine Google part: original specification cell matching Google's capacity and safety characteristics.
• Swollen battery safety: never use heat on or near a swollen battery. Remove a swollen cell carefully without puncturing it.
• Disconnect before fitment: disconnect the existing battery and display flex connectors at the mainboard before removal.
• Adhesive removal: the battery is secured with adhesive strips or glue. Release slowly and evenly; avoid metal tools and direct heat on the cell.
• Replacement adhesive required: fit fresh battery adhesive to secure the new cell.
• Bench-test before sealing: verify charging and battery percentage behaviour before reassembling.
• Installation should be carried out by a qualified technician using ESD-safe and battery-safe tools.

This is a genuine Google component, supplied brand new and unused. It is intended for use by qualified repair professionals and trade technicians only.