Restore the front camera and Face ID on an iPhone 16 Pro Max with this genuine reclaimed front camera module with dot projector, professionally removed from a working donor device and fully tested. Critically, this is a calibratable module: with iPhone 16 models and later, Apple permits a front camera to be replaced with one from another iPhone of the same model. Once the repair is completed through Apple's Repair Assistant, Face ID, the TrueDepth camera, and the dot projector all function normally, and the device shows "Used" next to TrueDepth Camera in Parts & Service History.

This complete module includes the front-facing camera, the dot projector, and the infrared camera that together make up the TrueDepth system. On earlier iPhone generations a reclaimed front camera could not restore Face ID because the parts were locked to the original logic board. The iPhone 16 Pro Max changes that — making a genuine reclaimed module a cost-effective alternative to a brand new assembly while fully restoring Face ID functionality after calibration.

Common Faults Resolved

• Front camera producing fuzzy, noisy, or out-of-focus selfies
• Face ID not working or "Face ID Issue" message
• "Move iPhone a little lower/higher" error during Face ID setup
• Front camera showing black screen in the Camera app
• TrueDepth camera failure after impact or liquid damage
• Dot projector damage preventing Face ID enrolment
• Front camera not focusing during FaceTime or video calls
• Failed prior repair using a non-calibratable or faulty module

Key Features

• Genuine Apple component — professionally removed from a working donor device, not an aftermarket copy
• Complete TrueDepth module — front camera, dot projector, and IR camera
• Can be calibrated via Apple Repair Assistant to fully restore Face ID
• Shows "Used" TrueDepth Camera after calibration — the expected genuine-part status
• Restores Face ID for unlock, Apple Pay, and app authentication
• Fully tested before dispatch — camera capture and Face ID hardware verified
• Cost-effective alternative to a brand new front camera assembly
• UK trade dispatch with fast delivery to UK repair shops
• 30-day warranty on this reclaimed genuine part

Compatible With

• Apple iPhone 16 Pro Max — all regional variants

Not Compatible With

• iPhone 16 Pro — smaller Pro model, different front camera assembly
• iPhone 16 / 16 Plus — standard models, different module
• iPhone 15 Pro Max and earlier — previous generations, parts not cross-compatible and not calibratable in the same way
• iPhone 17 series / iPhone Air — use the Center Stage camera, a different system

What's Included

• 1 x Genuine reclaimed iPhone 16 Pro Max front camera module with dot projector and IR camera (complete TrueDepth assembly)

Important Notes

• Calibration is mandatory: after fitting, the repair must be completed through Apple's Repair Assistant (Settings → General → About → Parts & Service History → Restart & Finish Repair). Until calibration is complete, Face ID will not unlock the device, authorise payments, or sign in to apps.
• "Used" status is normal: after calibration the device will show "Used" next to TrueDepth Camera. This is the expected, correct status for a genuine part transferred from another device — it does not indicate a fault.
• Reclaimed condition: this is a genuine Apple component professionally removed from a working donor device and tested. It is not "brand new in Apple packaging" — that is the distinction between Reclaimed and a new assembly.
• Handle the dot projector with care: the dot projector and IR camera are delicate. Avoid direct heat, do not touch the lens faces, and keep the module in its protective packaging until fitment.
• Disconnect the battery before fitment to prevent short circuits across the camera and display flex connectors.
• Back glass adhesive needed: this repair is accessed through the display; fresh display adhesive will be required to reseal the device and restore water resistance.
• Bench-test before sealing: after fitment and calibration, verify front camera capture, Face ID enrolment, and Face ID unlock before sealing the device.
• Cleanliness is critical: dust or fingerprints on the camera or dot projector lens will degrade image quality and may affect Face ID reliability. Work in a dry, dust-free environment.
• Installation should be carried out by a qualified technician using suitable separation, heat, and ESD-safe tools.

For our complete range of compatible components, visit our iPhone 16 Pro Max replacement parts category.

This is a genuine Apple reclaimed component, professionally removed from a working donor device and fully tested. It is intended for use by qualified repair professionals and trade technicians only.