Fit the back cover on a Samsung Galaxy S23 Plus (SM-S916) with this genuine Samsung Service Pack Back Cover Adhesive Tape, service part GH82-30556A. Sourced directly from Samsung's authorised service supply, this is pre-cut to the S23 Plus chassis perimeter dimensions — the same factory-grade adhesive Samsung uses on the original device — supplied brand new and unused for a single repair fitment.

Back cover adhesive is a single-use consumable required on every Samsung Galaxy S23 Plus repair that involves removing the rear glass — battery replacement, wireless charging coil work, NFC antenna repairs, midframe replacement, or any internal access job. Using genuine Samsung adhesive ensures the rebuilt device matches Samsung's original bond strength and perimeter seal — preserving the dust resistance and structural integrity of the chassis.

Common Faults Resolved

• Lifted, peeling or loose back cover following a previous battery or repair job
• Dust ingress around the back cover perimeter
• Failed bond from inferior third-party adhesive or hand-cut tape
• Required as a consumable on every S23 Plus repair that involves removing the back cover

Key Features

• Genuine Samsung Service Pack: sourced from Samsung's authorised service supply — same adhesive Samsung uses on the production line
• Pre-cut to S23 Plus perimeter: no measuring or trimming required — peel and place
• OEM-grade bond strength: matches the original Samsung-supplied adhesive performance
• Single-use consumable: one piece per repair fitment
• Trade-friendly SKU: essential bench stock for any repair shop servicing the S23 Plus
• UK trade dispatch: in stock with fast UK trade dispatch

Compatible With

• Samsung Galaxy S23 Plus — SM-S916B (UK / Europe)
• Samsung Galaxy S23 Plus — SM-S916B/DS (Dual SIM)
• Samsung Galaxy S23 Plus — SM-S916U (USA)
• Samsung Galaxy S23 Plus — SM-S916U1 (USA unlocked)
• Samsung Galaxy S23 Plus — SM-S916W (Canada)
• Samsung Galaxy S23 Plus — SM-S916E (India)
• Samsung Galaxy S23 Plus — SM-S916N (Korea)

Not Compatible With

• Samsung Galaxy S23 (SM-S911) — smaller chassis, different perimeter
• Samsung Galaxy S23 Ultra (SM-S918) — larger chassis, different perimeter
• Samsung Galaxy S22 Plus (SM-S906) — different chassis design
• Samsung Galaxy S24 Plus (SM-S926) — different chassis design

What's Included

• 1 x Genuine Samsung Galaxy S23 Plus back cover adhesive tape (service part GH82-30556A)

Important Notes

• Single-use consumable: each adhesive is designed for one fitment only. Always renew the adhesive when reassembling a back cover — reusing original or previously-fitted adhesive will not provide a reliable seal.
• Clean before bonding: use isopropyl alcohol and a lint-free cloth to remove all old adhesive residue and contaminants from both the chassis frame and back cover surfaces before fitting the new adhesive. Bond strength depends entirely on surface preparation.
• Apply gentle heat during fitment using a heat plate or hot air station at low temperature (~50–70°C) to activate the adhesive and allow it to conform tightly to the chassis perimeter.
• Clamp or press evenly: after seating the back cover, apply uniform pressure around the perimeter for several minutes (or use a back cover clamp) to achieve full adhesive contact and tack-up before the device is returned to the customer.
• Water resistance disclaimer: the S23 Plus is IP68-rated by Samsung but back cover replacement (even with genuine service pack adhesive) does not restore the factory-rated water resistance certification. The rebuilt device will offer improved resistance to dust and incidental moisture but should not be relied on for submerged use.
• Inspect before use to confirm shape integrity, adhesive coverage and absence of debris.
• Installation should be carried out by a qualified technician using suitable heat and separation tools to avoid damage to the chassis or back cover glass.

For our complete range of compatible components, visit our Samsung Galaxy S23 Plus replacement parts category.

This is a genuine Samsung service pack part, supplied brand new and unused. It is intended for use by qualified repair professionals and trade technicians only.