
- Stock: Out Of Stock
- Brand: Samsung
- Compatible with: SM-X710/X716B
- SKU: 9509902010144
Restore the display on a Samsung Galaxy Tab S9 (SM-X710 Wi-Fi or SM-X716B 5G) with this genuine Samsung Screen Assembly, service part GH82-31769A. The assembly is the factory 11" Dynamic AMOLED 2X panel with its touch digitiser already bonded on. It replaces a cracked, dead or faulty display with original Samsung quality.
Genuine Samsung display assemblies give factory-correct colour, brightness and touch response, with none of the colour shift, touch lag or S Pen problems common with aftermarket tablet screens. It suits trade repairers who want a reliable Tab S9 screen repair that stands up to customer scrutiny.
Common Faults Resolved
- Cracked or shattered front glass
- Black, blank or flickering display
- Green or pink lines, bleeding or dead areas on the AMOLED panel
- Unresponsive, ghost-touching or partially working touch
- S Pen not registering on the screen surface
Key Features
- Genuine Samsung Screen Assembly: original Samsung part GH82-31769A
- Display: 11" Dynamic AMOLED 2X, 2560 x 1600 resolution
- Refresh rate: up to 120Hz, the same as the original screen
- Display and digitiser bonded: panel and touch layer come as one assembly
- Factory colour accuracy and brightness: no aftermarket colour shift or touch lag
- Part code GH82-31769A: search our site by Samsung part code
- UK trade dispatch: in stock and dispatched fast from the UK
Compatible With
- Samsung Galaxy Tab S9 - SM-X716B
- Samsung Galaxy Tab S9 Wi-Fi — SM-X710
- Samsung Galaxy Tab S9 5G — SM-X716B
Not Compatible With
- Samsung Galaxy Tab S9+ (SM-X810 / SM-X816B): larger 12.4" display
- Samsung Galaxy Tab S9 Ultra (SM-X910 / SM-X916B): larger 14.6" display
- Samsung Galaxy Tab S9 FE (SM-X510 / SM-X516B): different LCD display
- Samsung Galaxy Tab S9 FE+ (SM-X610 / SM-X616B): different LCD display
- Samsung Galaxy Tab S8 (SM-X700 / SM-X706) and Tab S10 series: different display assemblies
What's Included
- 1 x Genuine Samsung Galaxy Tab S9 Screen Assembly (service part GH82-31769A)
Important Notes
- Check the model number before ordering: go to Settings > About tablet, or read the code on the rear housing. This assembly fits SM-X710 and SM-X716B only.
- Fitting: the assembly bonds to the tablet's existing chassis. Remove the damaged screen with controlled heat. Before fitting, check the frame is straight and undamaged, because a bent or twisted frame will crack the new panel.
- Display adhesive required: remove all old adhesive and debris from the frame and fit new display adhesive. Adhesive is not included.
- Handle the panel with care: do not flex the screen, press on the display area or pull on the flex cable. AMOLED panels are fragile, and pressure damage is not covered by warranty.
- Disconnect the battery first: do this before any internal work to avoid short circuits and damage to the display.
- Bench-test before bonding: connect the assembly and check the display, touch across the whole surface, S Pen, brightness and 120Hz refresh before you apply adhesive.
- Water resistance: the Tab S9 is IP68 rated. A screen replacement does not restore the factory water-resistance certification.
- Use ESD-safe tools: installation should be carried out by a qualified technician using suitable heat and separation tools. iParts4U is not responsible for damage caused during installation.
For our complete range of parts, visit our Samsung Galaxy Tab S9 replacement parts category.
This is a genuine Samsung part, supplied new and intended for qualified repair professionals and trade technicians.
| Specifications | |
| Source | Genuine |
| Product Type | |
| Product Type | Screen |
| Warranty | |
| Warranty Length | 30 Days |
