Fit the new screen on an iPad Pro 11 2nd Generation (2020) with this genuine tesa 61395 Pre-Cut Touch Screen Adhesive — a UK exclusive from iParts4U. tesa is the German industrial adhesive brand trusted by mobile device manufacturers for OEM bonding work, and the 61395 specification is a high-performance double-sided tape used widely in display and chassis bonding applications.

By supplying the adhesive pre-cut to iPad Pro 11 2nd Gen perimeter dimensions, we save the technician the time of measuring and trimming raw tesa roll stock — a step that typically wastes material, introduces edge inconsistencies and adds bench time per repair. Pre-cut delivers the same OEM-grade bond strength as roll tape, with significantly less waste and a faster, cleaner workflow.

Common Faults Resolved

• Lifted or peeling display edges following a previous repair
• Dust, debris or moisture ingress around the touchscreen perimeter
• Failed bond from inferior third-party adhesive or hand-trimmed tape
• Inconsistent adhesive coverage causing pressure points and uneven seating
• Required as a consumable on every iPad Pro 11 2nd Gen touchscreen replacement

Key Features

• Genuine tesa 61395: the German industrial adhesive specification trusted by mobile device manufacturers
• UK exclusive pre-cut format: sourced and cut to iPad Pro 11 2nd Generation perimeter dimensions only at iParts4U
• Reduces material waste: no over-cutting from roll stock, no trimming offcuts
• Faster fitment workflow: peel-and-place application — saves bench time per repair
• Consistent edge geometry: precision-cut perimeter eliminates the variance of hand-trimmed tape
• OEM-grade bond strength: matches the original Apple-supplied adhesive performance

Compatible With

• iPad Pro 11" 2nd Generation (2020) — A2068
• iPad Pro 11" 2nd Generation (2020) — A2228
• iPad Pro 11" 2nd Generation (2020) — A2230
• iPad Pro 11" 2nd Generation (2020) — A2231

Not Compatible With

• iPad Pro 11" 1st Generation (2018) — different perimeter dimensions
• iPad Pro 11" 3rd Generation (2021, M1) and later — different perimeter dimensions
• iPad Pro 12.9" of any generation — much larger frame

What's Included

• 1 x Genuine tesa 61395 pre-cut touch screen adhesive for iPad Pro 11" 2nd Generation

Important Notes

• Single-use consumable: each pre-cut adhesive is designed for one fitment only. Always renew the adhesive when reassembling a touchscreen — reusing original or previously-fitted adhesive will not provide a reliable seal.
• Clean before bonding: use isopropyl alcohol and a lint-free cloth to remove all old adhesive residue and contaminants from both the touchscreen frame and chassis surfaces before fitting the new adhesive. Bond strength depends entirely on surface preparation.
• Apply gentle heat during fitment using a heat plate or hot air station at low temperature (~50–70°C) to activate the adhesive and allow it to conform tightly to the chassis perimeter.
• Clamp or press evenly: after seating the touchscreen, apply uniform pressure around the perimeter for several minutes (or use a screen clamp) to achieve full adhesive contact and tack-up before the device is returned to the customer.
• Water resistance disclaimer: the iPad Pro 11 2nd Gen is not rated for IP water resistance by Apple, so adhesive replacement does not affect water-resistance certification. The seal will improve resistance to dust and incidental moisture but should not be relied on for submerged use.
• Inspect before use to confirm shape integrity, adhesive coverage and absence of debris.
• Installation should be carried out by a qualified technician using suitable heat and separation tools to avoid damage to the chassis or display assembly.

For our complete range of compatible components, visit our iPad Pro 11" 2nd Generation replacement parts category.

This is a genuine tesa-branded industrial adhesive product, pre-cut to iPad Pro 11" 2nd Generation specifications by iParts4U. It is not manufactured or supplied by Apple. This product is intended for use by qualified repair professionals and trade technicians only.