As the usage of apple products continue to rise, many people and companies have since come to appreciate the use of iPads. Although the size of iPads may vary from one to the next, our store offers any iPad touch screen digitizer.

What happens when replacing screen digitizers for refurbishment

The best way to find the correct Ipad screen digitizer is from the model number. You can find the model number from the digitizer flat cable connector. Now that you have the right digitizer for your iPad, you can now heat the digitizer at 60 C to make it easier to remove. When doing this, make sure you wear protective gloves to prevent cuts from the glass.

After removing the spoilt screen, it is now time to place the new screen. Carefully remove the masking tape from the newly acquired screen and place it on the plastic frame. Now resemble back the tablet in reverse order. Make sure you place the digitizer flat cable and conduct trials before fully finishing the assembly.

The variety of Digitizers that our store offers range from:

• iPad Air 2
• iPad mini 4
• iPad mini 5
• iPad mini pro 10.5''

FAQ

When looking to make a purchase on electronic devices it leads to lots of questions since some people may still be new in doing this. More so, sometimes the questions help people to take caution on online fraudsters who will end up selling you fake and wrong products. Some of the frequently asked questions are:

Do I need to replace the digitizer or just the glass?

When your device fails to respond to touch, then the digitizer has issues. You need to replace it. However, the digitizer is bonded to the screen and if there is a need to replace then you need the glass too.

Are a Digitizer and a screen the same thing?

No, the digitizer is not the same as the screen. A digitizer is an electrical component connected to the glass screen to help in touch sensitivity.