For iPad Mini - iPad Mini 2 - Digitizer Touch Screen - Black - Premium Quality
Have you cracked your black iPad Mini digitizer? If so, then this is the replacement touch screen digitizer for you - it is as close in quality to the digitizer your iPad mini comes with when it comes fresh out of the box when you first buy it. This is the best quality part that you can get to repair the iPad mini as an aftermarket repair part if you have cracked or damaged the outer glass. This part includes the IC chip connector pre-soldered to the flex, the sleep wake function sensor, home flex and camera holder. This repair takes around 30 minutes to complete. Please also note it is very important to disconnect your battery prior to disconnecting your original LCD and digitizer.
Please ensure that the bottom of the digitiser is insulated prior to fitment. We recommend using a kapton tape, availble here.
** This part is not made by Apple and is a replacement part made for aftermarket repairs. Please do not confuse this part with something which Apple have manufactured.
We would recommend that customers watch a few repair videos before undertaking this repair. Please also ensure you disconnect the battery before install.
for iPad Mini Wi-Fi
for iPad Mini Wi-Fi & 3G
for iPad Mini 2 Wi-Fi
for iPad Mini 2 Wi-Fi & 4G
Touch screen digitizer x 1
Camera holder x 1
Home button x 1
IC chip pre-soldered x 1
Magnetic sensor flex x 1
Adhesive pre-applied x 1
How to Install / Tips:
· Please choose the right part before placing an order.
· Please try to handle the repair or replacement work in a dry and dust free environment without direct sunlight.
· Special tooling is required when disassembling and reassembling the iPad Mini and Mini 2.
· The installation of any new parts should be done by a qualified person. iParts4u is not responsible for any damage caused during installation.