This aftermarket LCD FPC Connector is a direct board-level replacement for the Samsung Galaxy A70, A71 4G, A71 5G, S20 FE, and S21 FE, restoring the connection between the display flex cable and the motherboard on devices where the connector has been damaged, torn, or detached. Featuring 40 gold-plated pins with a flip-lock latch mechanism, this connector is designed for experienced repair technicians with micro-soldering capability.

The LCD FPC connector is the onboard motherboard component that receives the display flex cable, enabling communication between the motherboard and the LCD assembly. Damage to this connector — commonly caused by forced removal of the display, liquid ingress, or a failed screen replacement — can result in no display output, a blank screen, or intermittent display failure even when the screen itself is undamaged. Replacing the connector at board level is the most precise and cost-effective solution, avoiding the need for a full motherboard replacement.

Common Faults Resolved

• No display output despite the screen being undamaged
• Blank or black screen following a screen replacement
• LCD flex cable not seating correctly due to damaged connector
• Intermittent display failure or flickering after connector damage
• Connector pins bent, broken, or detached from the motherboard
• Display fault caused by liquid ingress to the connector area

Key Features

• Part Type: LCD FPC Connector — Onboard Motherboard Component (Aftermarket)
• Pin Count: 40 Pin
• Pin Material: Gold-plated for reliable signal transmission and corrosion resistance
• Locking Mechanism: Flip-lock latch for secure display flex cable retention
• Function: Connects the display flex cable to the motherboard to enable LCD output
• Fit: Compatible across five Samsung models — see Compatible With below

Compatible With

• Samsung Galaxy A70 - SM-A705
• Samsung Galaxy A71 4G - SM-A715
• Samsung Galaxy A71 5G - SM-A716
• Samsung Galaxy S20 FE - SM-G780
• Samsung Galaxy S21 FE - SM-G990

What's Included

• 1 x LCD FPC Connector - 40 Pin - Aftermarket (Samsung Galaxy A70 / A71 4G / A71 5G / S20 FE / S21 FE)

Important Notes

• This repair requires micro-soldering. The connector must be removed from and resoldered onto the motherboard using appropriate micro-soldering equipment. This part is intended for experienced technicians with the correct tools and is not suitable for general workshop use without micro-soldering capability.
• Always power down the device and disconnect the battery before attempting any board-level repair.
• No Samsung part number is available for this component. It is an aftermarket connector manufactured to match original equipment specifications.