Restore the structural integrity of the Samsung Galaxy S20 FE (SM-G780) and S20 FE 5G (SM-G781) with this aftermarket Midframe Housing in Cloud Mint. The midframe is the central metal-and-plastic structure that holds the device's logic board, battery, screen and back cover in place — a bent, cracked or warped midframe after an impact event prevents proper screen seating, causes case alignment issues and undermines the device's water and dust resistance.

Manufactured to compatible specifications, the housing matches the original Samsung dimensions, cutouts and fixing-screw positions across both S20 FE and S20 FE 5G models (the chassis architecture is shared between the two variants). The Cloud Mint finish is colour-matched to the original device for an OEM-finish full chassis rebuild.

Common Faults Resolved

• Bent or warped midframe following impact or drop damage
• Cracked midframe causing screen lift or chassis flex
• Damaged screw threads or mounting points preventing reassembly
• Corrosion or liquid damage to the original midframe
• Cosmetic restoration during a full chassis rebuild
• Failed prior repair using a poorly fitting alternative midframe

Key Features

• Multi-model fitment: covers both S20 FE (SM-G780) and S20 FE 5G (SM-G781) — shared chassis architecture
• Cloud Mint finish: colour-matched to the original Samsung device for OEM-finish repairs
• Precision dimensions: matches the original Samsung cutouts, antenna channels and fixing-screw positions
• Full chassis rebuild ready: the structural foundation for a complete S20 FE repair
• Cost-effective alternative to a full Samsung-supplied service pack chassis

Compatible With

• Samsung Galaxy S20 FE 4G — SM-G780F
• Samsung Galaxy S20 FE 4G — SM-G780F/DS
• Samsung Galaxy S20 FE 4G — SM-G780G
• Samsung Galaxy S20 FE 5G — SM-G781B
• Samsung Galaxy S20 FE 5G — SM-G781B/DS
• Samsung Galaxy S20 FE 5G — SM-G781U

Not Compatible With

• Samsung Galaxy S20 (SM-G980/G981 — different chassis)
• Samsung Galaxy S20+ (SM-G985/G986 — larger chassis)
• Samsung Galaxy S20 Ultra (SM-G988 — larger chassis)
• Samsung Galaxy S21 FE and later — different chassis dimensions

What's Included

• 1 x Aftermarket Samsung Galaxy S20 FE / S20 FE 5G midframe housing in Cloud Mint

Important Notes

• Colour-specific part: this is the Cloud Mint variant. Samsung supplies the S20 FE and S20 FE 5G in multiple colour-matched finishes (Cloud Navy, Cloud Lavender, Cloud Mint, Cloud Red, Cloud White, Cloud Orange). Fitting the wrong colour will produce a visible mismatch around the chassis edge.
• Full chassis rebuild required: a midframe replacement is a major repair — every internal component (logic board, screen, battery, charging port, antennas, speakers, buttons) must be transferred from the original chassis to the new midframe. Allow significant bench time and use the correct documentation for component routing.
• Transfer all gaskets, brackets and shielding from the original midframe to the new one, or replace with fresh equivalents. Missing or damaged gaskets will undermine dust resistance and may cause RF interference.
• Water resistance disclaimer: aftermarket midframe housings do not restore Samsung's factory-rated IP68 water and dust resistance certification. The rebuilt device will offer improved dust resistance but should not be relied on for submerged use.
• Adhesive renewal: use fresh display adhesive, battery adhesive and back cover adhesive during reassembly — original adhesive cannot be reused once disturbed.
• No soldering required for the midframe itself — but board-to-board connectors, antennas and flex cables must be carefully re-seated during the chassis rebuild.
• Installation should be carried out by an experienced technician familiar with full chassis rebuild workflows, using suitable heat, separation, isopropyl alcohol and ESD-safe tools.

For our complete range of compatible components, visit our Samsung Galaxy S20 FE replacement parts and Samsung Galaxy S20 FE 5G replacement parts categories.

This is an aftermarket component, not a genuine Samsung part. It is manufactured to compatible specifications and is intended for use by qualified repair professionals and trade technicians only.