This aftermarket LCD FPC Connector Port is a direct replacement for the onboard connector on the Samsung Galaxy S20 SM-G980, restoring the physical connection between the display flex cable and the motherboard on devices where the connector has been damaged, torn, or detached. Designed for experienced repair technicians with micro-soldering capability working on SM-G980 handsets.

The LCD FPC connector is the onboard motherboard component that receives the display flex cable, enabling communication between the motherboard and the LCD assembly. Damage to this connector — commonly caused by forced removal of the display, liquid ingress, or a failed screen replacement — can result in no display output, a blank screen, or intermittent display failure even when the screen itself is undamaged. Replacing the connector at board level is the most precise and cost-effective solution, avoiding the need for a full motherboard replacement.

Common Faults Resolved

• No display output despite the screen being undamaged
• Blank or black screen following a screen replacement
• LCD flex cable not seating correctly due to damaged connector
• Intermittent display failure or flickering after connector damage
• Connector pins bent, broken, or detached from the motherboard
• Display fault caused by liquid ingress to the connector area

Key Features

• Part Type: LCD FPC Connector Port — Onboard Motherboard Component (Aftermarket)
• Function: Connects the display flex cable to the motherboard to enable LCD output
• Fit: Direct replacement for the onboard LCD FPC connector on the Samsung Galaxy S20 (SM-G980)

Compatible With

• Samsung Galaxy S20 - SM-G980F
• Samsung Galaxy S20 - SM-G980F/DS

What's Included

• 1 x LCD FPC Connector Port Onboard - Aftermarket (Samsung Galaxy S20 SM-G980)

Important Notes

• This repair requires micro-soldering. The connector must be removed from and resoldered onto the motherboard using appropriate micro-soldering equipment. This part is intended for experienced technicians with the correct tools and is not suitable for general workshop use without micro-soldering capability.
• Always power down the device and disconnect the battery before attempting any board-level repair.

Disclaimer: This is an aftermarket component, not a genuine Samsung part. It is manufactured to compatible specifications and is intended for use by qualified repair professionals and trade technicians only.